- Hign-concerned Chemical: None
- Interface Diameter: None
- Water Quality Requirements: High Quality Drinking Water
- 5 Stage Filtration: No
- Water Yield(Liter/Minute): 0.1
- Installation: Table Type
- Function: Direct Drink
- Power (W): 10W
- Model Number: YJS3215001
- Material: ABS
- Purifying Position: Terminal Purification
- Certification: CE
- Type: Ionizer
- Water treatment machine Type: Water Purifier
- Use: Pitcher
- Brand Name: ormismart
- Origin: Mainland China
- CN: Guangdong
- Capacity: 420ml
- Function: Produce Hydrogen-Rich Water
- Hydrogen water generator pem: water purifier
- Voltage/Electricity Rate: pplicable 100- -240V/50-60HZ
- Full power usage times: 15-20 times
- Rated voltage: 220V
- Charging time: 2-3 hours
- Working time: 3 minutes/1 time
- Color: Silver / Black
NOTE:
We can provide custom logo on the water cup for free for dropping. If you need to customize your own logo on the water cup, the quantity needs to be more than 30 pieces.
Hydrogen Generator Water Cup Filter Ionizer Maker Hydrogen-Rich Water Portable Super Antioxidants ORP Hydrogen Bottle 420ml
RA-01 Features:
1.Improve cellular health and enhance better nutrient absorption in the body,Improvement of blood glucose & HbA1c levels in diabetes .
2.Made of high borosilicate glass, high quality and safe to use.
3.It only takes 3 minutes to produce a cup of hydrogen rich water which can be drunk directly.
4.Better hydration for your body- increase blood circulation,Help to lower saturated fat levels
5. Reduce aging to give healthy looking skin
6.Improve memory in aged individuals – reduce constipation problems
RA-01 Specifications:
Product name: Hydrogen-oxygen separation hydrogen-rich cup
Voltage/Electricity Rate: Applicable 100- -240V/50-60HZ
Product capacity: 420ml
Full power usage times: 15-20 times
Appearance size: 7*20.7CM
Rated voltage: 220V
Power consumption: 10W
Hydrogen concentration: 700-900PPB
Battery capacity 1000mAh
Charging time: 2-3 hours
Working time: 3 minutes/1 time
Color: Silver / Black
RA-01 How to use it ?
Step 1. Install drinking water, first charge mineral water.(The lid of the water cup needs to be opened when producing hydrogen.)
Step 2. Just press once, the blue light will light up, 3 minutes hydrogen will be generated and the system will shut down automatically.
Step 3. Press for three seconds to turn off the device automatically. All lights are off and the machine is off. When there is no power, the water cup will flash red, the light will be red when charging and the light will turn green when fully charged (partially blue).
Step 4. Turn the glass counter-clockwise after the scale on the electrolyte film is generated. After cleaning, turn it clockwise to tighten the glass.
Please note:
1. If you notice any cracks in the product during the first use, please contact us. If there is no problem, please charge the product for 3 hours. Please disconnect the charger after the product is fully charged.
2. Do not use juice or drinks.
3. The water temperature should be below 60 °C.
4. Please charge when empty, and do not use it when charging.
5. When using for the first time, some water may remain close to the bottle. This is residual water for factory inspection and does not cause health problems.
6. If the water quality is too hard, causes deposits and affects hydrogen generation, please wash it with white vinegar.
Product List:
1 x Hydrogen Water Generator
1 x USB Line
1 x Manual
RA-01 NOTE:
1. Please open the lid of the water cup when producing hydrogen
2. Pour mineral water into the water cup, but not pure water, because pure water cannot be electrolyzed.
Reviews
There are no reviews yet.